2x50W +100W 2.1 Channel Subwoofer Amplifier Board with Treble and Bass Control, Dual TPA3116 Chip, DC 12-24V, Bluetooth and AUX Inputs, DIY Wireless Speakers AMP Board

$42.18

Los gastos de envío se calculan en la pantalla de pagos.

【High Fidelity HIFI Sound】Adopt imported TPA3116D2 chips, with excellent power amplifier effect. the distortion is less than 0.1% even at high power output. modulation frequency up to 1.2MHZ， built-in LC filter capacitor to make the vocals clearer.

【Parameters】Input Voltage: DC 12V-24V；Max Power Output: 50W*2（R&L）+100W（Subwoofer）；Input Method: Bluetooth & AUX；Channel: 2.1 CH Stereo Output；Output Impedance：4-8Ω ；Bluetooth Version：BT 5.0

【AUX & Bluetooth Input】 Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have Bluetooth, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug.

【Protect Function】This Amp Board Has Overheat Protection, Reverse protection, Circuit Protection, Over-voltage and Under-voltage Protection

【After-sales Service】 Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time.

I 2x50W +100W 2.1 Channel Subwoofer Amplifier Board with Treble and Bass Control, Dual TPA3116 Chip

2x50W +100W 2.1 Channel Subwoofer Amplifier Board

Specification:

Product Name: 2.1 channel TPA3116D2 Bluetooth amplifier

AMP Chip: 2*TPA3116D2

Max Output Power: 2*50W+100W

Power Supply: DC12~24V

Channels: 2.1

Output Impedance: 4~8ohm

Working Type: Class D

Audio Input: AUX / Bluetooth 5.0

Packing Include:

1 X ZK-TB21 Power Amplifier Board
1 X Protective Shell
1 X DC Plug
1 X Screwdriver
5 X Knob

NOTE

Only when the audio input is sufficient and the power supply voltage/current input is sufficient, can there be enough power output.

The higher the power supply voltage, the greater the output power;

The smaller the impedance of the speaker, the greater the output power. It is recommended to use a 4Ω speaker.

Finally, please make sure that the power of the adapted power supply is greater than the actual working power of the AMP to ensure the maximum output power

Warm Reminder:

The power switch on the board is a standby switch. After the switch is turned off, the machine is in a low-power standby state. To completely turn off the power or unplug it for a long time, you can unplug the DC plug on the machine. Properly increasing the voltage or reducing the speaker impedance can effectively increase the output power.