Phase tester rotary field meter AC60V~600V, equipped with crocodile clips and buzzer tester, suitable for testing high voltage devices
Test pen for three-phase tester, LED indicator phase sequence, test pen and crocodile clip
|
|
|
|
|---|---|---|
|
Test the pen and how to install it when you use it. Note: This meter is a high voltage tester. Check whether the gauge is in good condition before use. It cannot be used if it is damaged. During measurement, a high voltage is applied by the test lead. Do not touch the bare wire or the metal part of the test lead directly with your hands to avoid electric shock. |
LED indicator light of the three-phase tester: LED for testing the open phase: three orange LEDs, each showing U-phase, V-phase and W-phase. LED for phase sequence test: one red LED and one green LEDYou can safely use the phase tester to test when the voltage is lower than 600 V. |
The SM-852B phase tester has two main functions, open phase and phase sequence detection and display. Test lead: red corresponds to the U (R) phase (L1, R); yellow corresponds to the V (Y) phase (L2, S); green corresponds to phase W (B) (L3, T). 3 test props, pins can be connected with crocodile clips |
Three-phase tester
The three-phase tester can make it easier for you to check the phase sequence of voltage, current, etc., so you better understand your devices. Working voltage: 60~600VMeasurable frequency range: 20Hz~400HzMaximum voltage resistance: 2000 V/min (pulse voltage 4000 V). Weight: approx. 200gAccuracy: 01% continuous use time: no more than 60 minutes at 200 V ACV, no more than 4 minutes at 600 V ACV
Package includes:
- 1 x main device with test leads
- 1 x user manual
- 1 x zip blue carry bag
- 3 x alligator clips
Application scenarios phase follow-up tester
|
|
|
|
|
|---|---|---|---|
Voltage detection |
For indoor use |
Factory test voltage |
steelwork |
